The below post explains the end to end process of software updates management in SCCM 2012 Pre-requisites: 1. WSUS Server (WSUS 3.0 SP2 ) should be installed on the SCCM site server or if you want to install WSUS on another server, it is important that you install WSUS administration console as the SCCM Server uses API. This link explains the step by step procedure to install WSUS 3.0 SP2 2. Install SUP-Software Update Point on the SCCM Server . 3. Reporting Services Point: Install reporting services point role as described in this link . 4. Client agent: The software update client agent should be enabled(will be enabled by default) and the settings have to specified as per the requirement. On SCCM console, go to Administration>Site Configuration>Client settings>Right click on Default client settings> Click on Properties. If required, we can create custom client settings and then enable client settings for that settings. ...
Site Boundaries-Definition:
SCCM Site Boundary is defined scope to get the machines
within its range. Computers are assigned as clients to Configuration Manager
2007 sites according to the boundaries defined in the SCCM Server. There are 4
types of boundaries in SCCM 2007:
- AD site- based on Active directory sites.
- IP subnet-based on IP subnets available on the network.
- IPv6 Prefix-IPV6
- IP range-we can add specific ranges instead of defining entire IP Subnet.
Important Note: Super netting is not supported by
SCCM 2007. Use IP ranges to minimize the impact of using Super netting in the
environment.
Go through the below TechNet link before planning to use any
specific boundary.
To add a boundary:
- In the Configuration Manager
console, navigate to System Center Configuration Manager / Site
Database / Site Management / <site code>
– <site name> / Site Settings / Boundaries.
Click New Boundary.
- On the New Boundary properties
page, enter the following information:
Description
: Provide a description of the boundary
Site Code:
Select the available sites from the dropdown menu.
Type:
Select the appropriate boundary here.
- Select the network connection type,
either Slow or unreliable or Fast (LAN).
4. Here, I am using AD Site as the boundary.
Select AD Site, click on browse and select the available site in the “Browse AD sites”
ReplyDeleteHi, I think now I have a strong hold over the topic after going through the post. The subject that you have discussed in the post is really amazing; I will surely come back for more information.
http://www.gofastek.com